30-500 HALF MASK


ICAN Half Mask 30-500 is a CE-marked half mask, tested and approved in accordance with European standard EN 140:1989, for the protection of the user´s respiratory organs against harmful solid and liquid particles,fumes and gases.



ICAN Half Mask 30-500 is a newly developed and state of the art half mask which provides safety and comfort in even the most exacting working environments. 30-500 can be used in situations which require a particularly high degree of hygiene or where there is a risk of adhesion of dyes, for example.

 




 

Face blank:
30-500 is produced in soft silicone, which does not cause allergic reactions and gives the user a particularly high degree of hygiene and comfort. The anatomical design fits the shape of the face perfectly to provide maximum tightness and comfort.

Head harness:
30-500 is equipped with adjustable straps ("quick release") which ensure a rapid, perfect and comfortable fit. The two-piece head band ensures that the mask cannot slip and is thus held in the same position on the face during use.

Filters:
Only ICAN-filters are tested and approved for use with 30-500. The filters has an ICAN-bayonet socket which enables quick and easy connection.
Always fit two new filters at the same time on 30-500. The bayonet socket's location on the filter means that, after fitting to the mask, the filter's centre of gravity is located close to the face, which provides good weight distribution and unhindered vision. The following ICAN-filters are available for 30-500: P3, A2, A2-P3, A1B1E1-P3 and A1B1E1K1-P3 (Refer to technical data sheet for these filters). Please contact us if other filter types are needed.
 		 3 sizes:
30-500 is produced in 3 sizes: Small-Medium-Large. Whatever the user's facial shape and size, there is therefore always a 30-500 which fits the user's face tightly and comfortably.


Front piece:
The straps on the 30-500 are fixed to a plastic front plate so that, when in use, the mask is pressed against the face with a uniformly distributed pressure, which provides the best and safest fit.


Exhalation valve:
Exhalation takes place through a very low resistance exhalation valve which sits in a valve housing and is thus well-protected against contamination and impurities. The exhaled air is led directly out of the mask so that the air exchange is improved considerably since the amount of moist exhaled air remaining in the mask is kept to a minimum.

Inhalation valve:
Inhalation takes place via two inhalation valves, whose natural rubber membranes offers only very low resistance.
Technical specifications: ICAN filters - Bayonet socket: Spare parts:
Face blank Silicone rubber . . . .
Straps(Head) Plasticband in two parts and weavet elastic Class Item no. Item no. Description
Straps(Neck) Weavet elastic P3 50-103 30-003 Strap set-complete
Filters ICAN Filters A2 50-202 30-004 Valve set-complete
Filter Connection ICAN-Bayonet socket A2-P3 50-506 Areas of use(Examples):
Front piece Plastic A1B1E1-P3 50-653 *Agriculture
Exhalation valve Neoprene rubber membrane A1B1E1K1-P3 50-703 *The chemical industry
Inhalation valve Nature rubber membrane . . *The medicine industry
Sizes Small-Medium-Large . . *The timber industry
Weight App.160 Gram(Medium) . . *The paint and varnish industry
Colour Blue . . *Shipyards
Approval EN 140:1989-CE0200 Please contact us if other filter types are needed. *Horticulture

Warning!
If the oxygen content of the air is less than 17% (by volume) oxygen, an air-supplied respirator must be used instead of filters. If the polluted air's oxygen content is 17-21% (by volume), ICAN HALF MASK 30-500 can be used with ICAN particle filters, ICAN gas filters and ICAN combined filters with ICAN-bayonet socket. If the air's gas content exceeds 0.1 % (by volume), full face masks (ICAN FULL FACE 20-100, ICAN FULL FACE 20-300 B or ICAN FULL FACE 20-300 Y) should be used. It is important that the half mask's instruction manual is read carefully before use.